> DDS Function Signal Generator
> Digital Multimeters
> Distortion Analyzer
> Four Probe experiment
> Function Generator
> IC Testers
> LCR Meters
> Oscilloscopes
> Power Supplies
> Pulse Wave Frequency Meter
> Signal / Function Generator
> Storage Oscilloscopes
> Two Probe Setup
> Withstand Tester
> General Physics Equipments
 
- Digital Micro Volt Meter
- Digital Nano Ammeter
- Digital Pico Ammeter
- Digital Gaussmeter
- Magnetic Field Measurement Apparatus
- Study of Dieletric Constant & Curie Temp of Ferroelectric Ceramics
- e/m Experiment
- Planck’s Constant by Photoelectric Effect
- Determination of Planck’s Constant by means of LED’s
- Frank Hertz Experiment
- Ionisation Potential Set-up
- Measurement of Magnetoresistance of Semiconductors
- Two Probe Method for Resistivity Measurement of Insulators
- Electron Spin Resonance Spectrometer
- Study of Thermoluminescence of F-centres in Alkali Halide Crystals
- Hall Effect in Metals
- Dependence of Hall Coefficient on Temperature
- Apparatus for the Measurement of Susceptibility of Paramagnetic Solution by Quinck's Tube Method
- Apparatus for the Measurement of Susceptibility of Solids by Gouy’s Method
- Magnetic Hysteresis Loop Tracer
   
> TEKON INSTRUMENTS
  - T100 Network Cable Detector
  - T550 Power Quality Analyzer
  - T560 Power Quality Analyzer
  - T600 Txr Turn to Ration
  - T610 Txr Analyzer
  - T650 ESS Diagnostic
  - T700 Ind. Robot Diagnostic
  - T800 EV-HEV Diagonstic
 
   
   
   
   
 
 
General Physics Equipments

Hall effects in Metal - HEM01
   
Hall Effect enables the charge carrier concentration and mobility to be determined by experiment. Direction of the Hall Voltage in silver indicates negative charge carriers, which is in agreement with concepts of the model of the ‘free electron gas‘. Limitations of this model are shown by the so called ‘abnormal Hall Effect’ of tungsten. The experiment carried out under identical conditions for tungsten show the Hall Voltage to have about same magnitude but opposite direction as in silver. This can be explained by the ‘Energy Band diagram’. The tungsten atom has …….5s2 5p6 5d4 6s2 electronic structure. When the atoms come close together to form the solid, the close lying states 5d and 6s broaden into bands, with s band broadening considerably more than the d band. This is because of the larger size of the s orbital. The figure schema- tically shows the allowed energies as a function of the interatomic distance. The number of allowed states is ten per atom in the d band and two in the s band. In tungsten there are six electrons to be shared between these two bands. The result is that at the interatomic distance in tungsten there are holes in the d band and electrons in the s band, making tungsten predominantly a hole conductor. This sort of mixed (electrons and holes) conduction is a general characteristic of transition metals. The apparatus consists of the following:  
   
 

 

Description of the experimental set-up

The set-up consists of the following.

a) Hall Probe-Silver (HP-Ag)

Material

Silver Strip (8 x 6 x 0.05 mm)

Contacts

Press type for current Spring Type for Voltage

Hall Voltage

~17 mV/10A/10KG (typical)

b) Hall Probe-Tungsten (HP-W)

Material

Silver Strip (8 x 6 x 0.05 mm)

Contacts

Press type for current Spring Type for Voltage

Hall Voltage

~15 mV/10A/10KG (typical)

c) High Current Power Supply, Model PS-20A

Range

0-20A continuosly variable

Accuracy

±0.5%

Regulation

±0.5% for ±10% variation of mains

Display

3½ digit, 7 segment LED

d) Digital Microvoltmeter, DMV-001

e) Electromagnet, EMU-75T

Pole Pieces

75mm tappered to 25mm

Mag. Field

20KG at 6mm airgap

Energising Coils

Two of approx. 13W each

Power

0-90Vdc, 3A, for coils in series
0-45Vdc, 6A, for coils in parallel

f) Constant Current Power Supply, DPS-175

g) Gaussmeter, DGM-202 or DGM-102

  


 

 

  

The experimental set-up is complete in all respect

  

 

  

 

 

  

 
* Products not listed can be ordered as per request.
* Model number may subject to change without intimation